BlackTop Overview
BlackTop is a permanent, moisture-cured, UV stable coating primarily used for topcoating surfaces previously sealed with RustSeal or any other paint/primer application.
BlackTop is a high performance protective coating specifically formulated to withstand dulling and fading caused by prolonged sunlight exposure.
BlackTop may be used alone as a resilient coating but it will not offer the ultimate rust protection unless it is used in combination with RustSeal.
For the best stop rust & ultraviolet protection, first apply RustSeal to permanently seal the surface and then topcoat with BlackTop for an incredibly tough and professional looking finish. Available in Gloss Black, OEM Satin Black & Flat Black.
Like RustSeal, BlackTop dries to a rock hard yet flexible coating that can be readily applied to chassis, coil springs and light weight panels. BlackTop also has high heat resistance and can be applied to almost all automotive applications except exhaust systems.
BlackTop is now available in a convenient Aerosol Spray Can!
Satisfaction guaranteed!
BlackTop Features
- Single component formula
- Permanent UV stability
- No chalking or fading
- Rock hard permanent topcoat
- Flexible coating which expands & contracts
- High temp resistance: 500F for non-aerosol; 300F for aerosol
- Non-porous coating
- Superior flow and leveling
- Available in a convenient Aerosol Can
- Apply by brush or sprayer
BlackTop Applications
automotive & truck chassis • engine compartments • suspension components floor pans & trunks • wheels & rims • wrought iron railings • fire escapes
BlackTop Coverage
Theoretical coverage at one mil (25 µm) is 400 sq.ft. per gallon/9.8 m² per liter. Material losses during mixing and application will vary and must be taken into consideration. Expect up to 50% less coverage on bare wood, rough or sandblasted surfaces.
12 oz aerosol 25 sq ft
1 pt can 50 sq ft
1 qt 100 sq ft
