Unisteer Vega Box to Rack Conversion for New Build

Part Number: 8000460-01

US$670.00

Status: Preorder

EA (1)

Description

Description

1928-32 Ford Cross Steer® New Build Kit (no shaft kit)

The Cross Steer is essentially a small half rack and pinion and was specifically designed for solid axle cars and trucks of this era with a mono leaf spring suspension. The system still uses a draglink between both wheels. Since the Cross Steer pivots only off the one side, it matches up perfectly with the stock suspension of the solid axle Fords. Sorry, it will not work on Chevys which had dual leaf springs.

The gear comes mounted to an angled bracket that has the same three hole pattern as the Vega box. This small rack & pinion is made of all automotive grade components and can handle a vehicle up to 3500 lbs!

Note: You must have split wishbones (at least 12 inches) or hairpins for the Cross Steer to properly work.

Features:

  • Pinion Type / Size:    9/16"-26 Spline
  • Amount of Travel:      6"
  • Turns Lock to Lock:   3.75 Turns
  • Inner End Threads:   Tube & Adapter 11/16"-18

Includes:

  • Rack & Pinion
  • Mounting Bracket
  • Mounting Hardware

Prop 65 Warning

Prop 65 Warning

WARNINGATTENTION CALIFORNIA RESIDENTS:
WARNING: This store sells products that may contain chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. By ordering products for delivery into California, you acknowledge that you have received this warning. Please feel free to contact us should you have any questions. For more information, go to www.P65Warnings.ca.gov.

Vendor

Vendor

Leadtime Estimate if Not in Stock
Will Call with Lead Time
To top